• Shaw Development also offers:
• Specialty Products
• Engineering Process
• Systems Engineering

LTM400
Lift & Turn Military Series Metallic Cap

All Shaw caps feature non rotating seals which last the life of the vehicle

• Key Features:
• Compatible with diesel fuel, hydraulic oil, and service fluids
• Lockable design with optional standard padlock
• Rollover safe meets 70/122 EEC. Leak tight during side slope or extreme vehicle operations

• General Specifications:

• Manufactured from impact resistant cast aluminum and composite materials
• Does not allow water to enter tank from outside sources such as rain or vehicle wash down
• Fits standard 4" (100mm) filler openings
• Use with filler nozzles up to 3.25" diameter

• Operation:
• The lift and turn design handle offers simple one hand operation. To remove the cap, raise the handle, turn it counterclockwise, and lift the cap off of the adaptor.

• Available Options:
• Custom logos and fluid symbols available
• Custom colors and finishes available
• Venting: Non Venting, positive venting, vacuum venting or any combination
• Special covers and debris guards for severe military applications.

• Filtration and Venting Specifications:
• Field replaceable filter cartridges
• Low cracking pressures which reduce stresses on fuel tank and fuel pump and enable usage with composite tanks
• Positive venting to relieve pressure within tank caused from thermal expansion, but no leakage on side slope or in rollover situations.

LTC350
Lift & Turn Commercial Series Plastic Cap

All Shaw caps feature non rotating seals which last the life of the vehicle

• Key Features:
• Compatible with diesel fuel, hydraulic oil, and service fluids
• Lockable design with optional standard padlock
• Rollover safe meets 70/122 EEC. Leak tight during side slope or extreme vehicle operations

• General Specifications:

• Manufactured from impact resistant composite materials
• Does not allow water to enter tank from outside sources such as rain or vehicle wash down
• Fits standard 4" (100mm) filler openings
• Use with filler nozzles up to 3.25" diameter

• Operation:
• The lift and turn design handle offers simple one hand operation. To remove the cap, raise the handle, turn it counterclockwise, and lift the cap off of the adaptor.

• Available Options:
• Custom logos and fluid symbols available
• Custom colors and finishes available
• Venting: Non Venting, positive venting, vacuum venting or any combination
• Special covers and debris guards for medium duty applications.

• Filtration and Venting Specifications:
• Field replaceable filter cartridges
• Low cracking pressures which reduce stresses on fuel tank and fuel pump and enable usage with composite tanks
• Positive venting to relieve pressure within tank caused from thermal expansion, but no leakage on side slope or in rollover situations.

QTC200
Quarter Turn Commercial Series Composite Cap

All Shaw caps feature non rotating seals which last the life of the vehicle

• Key Features:
• Compatible with diesel fuel, hydraulic oil, and service fluids
• Lockable design with optional standard padlock
• Rollover safe meets 70/122 EEC. Leak tight during side slope or extreme vehicle operations

• General Specifications:

• Manufactured from impact resistant composites
• Does not allow water to enter tank from outside sources such as rain or vehicle wash down
• Fits standard 58mm OD bayonet style filler necks
• Use with filler nozzles up to 1.5 " diameter

• Operation:
• The quarter turn operation allows for opening the cap with one hand. To remove cap pull out the locking tab, turn the cap counterclockwise 90 degrees, and lift the cap off of the adapter.

• Available Options:
• Custom logos and fluid symbols available
• Custom colors and finishes available
• Non-vacuum venting, open venting, or two way venting options
• Standard cap design can be modified to meet customer needs.

Cap Options Available

• Strainer Options Available:
• Perforated Metal, or Screen Mesh in any size or length

 

• Filter Neck & Adaptors Available:
• Metallic or Plastic - Weld on, bolt on, thread on, or press-in options